# Zsolti's Lösung
[Dialer Defaults]
Modem = /dev/modem
Baud = 57600
Init1 = ATZ
# Init2 = AT+CPIN=0000
Init3 = at+cgdcont=1,"IP","bob.at"
Area Code =
Phone = 0
Username = data@bob.at
Password = ppp
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Compuserve = 0
Force Address =
Idle Seconds = 300
DialMessage1 =
DialMessage2 =
ISDN = 0
Auto DNS = 1
Phone = *99#





nicolars - Nov 03, 2009 - 12:39 PM
Post subject: Hier noch ein paar Daten:
      Code:
eisbaer@notebook:~$ infobash -v3
Host/Kernel/OS  "notebook" running Linux 2.6.31-5.slh.2-sidux-686 i686 [ sidux 2009-02 Αιθήρ - kde-full - (200907141427) ]
CPU Info        (1) Intel Pentium Dual T2370 @ 1024 KB cache flags( sse3 nx lm ) clocked at [ 1733.000 MHz ]
                (2) Intel Pentium Dual T2370 @ 1024 KB cache flags( sse3 nx lm ) clocked at [ 1733.000 MHz ]
Videocard       Intel Mobile GM965/GL960 Integrated Graphics Controller  X.Org 1.6.5  [ 1280x800@60.0hz ]
Network cards   Broadcom BCM4311 802.11b/g WLAN
                Broadcom NetLink BCM5787M Gigabit Ethernet PCI Express
Processes 136 | Uptime 1min | Memory 167.1/2017.2MB | HDD Hitachi HTS54251 Size 160GB (79%used) | Client Shell | Infobash v3.25

Einwahl in der Konsole:
      Code:
eisbaer@notebook:~$ wvdial pin                         
--> WvDial: Internet dialer version 1.60               
--> Cannot get information for serial port.           
--> Initializing modem.                               
--> Sending: ATZ                                       
ATZ                                                   
OK                                                     
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0         
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0                     
OK                                                     
--> Sending: AT+CPIN=6253                             
AT+CPIN=6253                                           
OK                                                     
--> Modem initialized.                                 
--> Configuration does not specify a valid phone number.
--> Configuration does not specify a valid login name. 
--> Configuration does not specify a valid password.   
eisbaer@notebook:~$ wvdial umts                         
--> WvDial: Internet dialer version 1.60               
--> Cannot get information for serial port.             
--> Initializing modem.                                 
--> Sending: ATZ                                       
ATZ                                                     
OK                                                     
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0         
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0                       
OK                                                     
--> Sending: AT+CGDCONT=1,"IP","internet.eplus.de"     
AT+CGDCONT=1,"IP","internet.eplus.de"                   
OK                                                     
--> Modem initialized.                                 
--> Sending: ATDT*99#                                   
--> Waiting for carrier.                               
ATDT*99#                                               
NO CARRIER                                             
--> No Carrier!  Trying again.                         
--> Sending: ATDT*99#                                   
--> Waiting for carrier.                               
ATDT*99#                                               
CONNECT                                                 
--> Carrier detected.  Starting PPP immediately.       
--> Starting pppd at Tue Nov  3 13:28:05 2009           
--> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
--> --> PAP (Password Authentication Protocol) may be flaky.         
--> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
--> --> CHAP (Challenge Handshake) may be flaky.                     
--> Pid of pppd: 5939                                                 
--> pppd: XR� [18]R�                                                 
--> Using interface ppp0                                             
--> pppd: XR� [18]R�                                                 
--> pppd: XR� [18]R�                                                 
--> pppd: XR� [18]R�
--> pppd: XR� [18]R�
--> pppd: XR� [18]R�
--> pppd: XR� [18]R�
--> local  IP address 10.134.178.230
--> pppd: XR� [18]R�
--> remote IP address 10.64.64.64
--> pppd: XR� [18]R�
--> primary   DNS address 10.11.12.13
--> pppd: XR� [18]R�
--> secondary DNS address 10.11.12.14
--> pppd: XR� [18]R�


meine wvdial:
      Code:
#[Dialer Defaults] bleibt unangetastet, dies wurde von wvdialconf generiert!!! #
# ggf. muss die Modem Schnittstelle angepasst werden #

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
; Phone = <Target Phone Number>
ISDN = 0
; Username = <Your Login Name>
New PPPD = yes
; Password = <Your Password>
# gegebenen Falls die Schnittstelle anpassen #
Modem = /dev/ttyUSB0
Baud = 92160


# Passwort/pin an das Modem senden #

[Dialer pin]
# hier die pin eintragen #
Init3 = AT+CPIN=xxxx

# die eigentlich Einwahl ins Internet #

[Dialer umts]
Carrier Check = no
# Den Anbieter entsprechend anpassen #
Init4 = AT+CGDCONT=1,"IP","internet.eplus.de"
Stupid Mode = 1
# Phone auch entsprechend anpassen #
Phone = *99# 
Dialer Command = ATD
Dial Attemps = 2
Username = eplus
Password = internet

# user und paswd sind egal, dort kann irgend etwas eingetragen werden #
## ggf. an den Anbieter anpassen ##